Summary:

spv315 steel density, Special thick steel plate cutting needs to be preheated in advance. Some steel plates are prone to cracks after entering the cutting process, sometimes that is because the temperature is too low, and it is necessary to perform pre-he

Update time:

Apr 14 2021

Summary:

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with spv315 astm equivalent ordinary steel plate, the utilization rate of flat steel is increas

Update time:

Apr 14 2021

Summary:

16Mo3 steel is a kind of European boiler steel plate. 16Mo3 is different from other raw materials when welding. It must be preheated first, and the weld should be kept for about 30 minutes after the welding is completed. spv315 jis standard thickness, 16M

Update time:

Apr 14 2021

Summary:

Medium and heavy plate spv315 jis inventory spot: 23*3190*9220, 23*2470*8400, 22.5*3050*7300, 23*3500*10800, 21*3500*8840, 22*3400*11550, 29.5*1750*7150, 25*2500*12000, 27*1500*5000, 36*2720*7950, 27*1920*6000, 25*2630*3300, 26*3480*6000, 27*1800*600

Update time:

Apr 14 2021

Summary:

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is fast

Update time:

Apr 14 2021

Summary:

A plasma cutter uses a stream of compressed gas (air, nitrogen, argon, etc.) and a consumable wire electrode as the two primary feedstocks of the steel cutting process. The electrode sends a high electrical charge through the gas, raising its temperature

Update time:

Apr 14 2021

Summary:

15mo3 chemical composition products 2020 online supply: 6*1950*10000, 6*2000*10000, 6*2200*10000, 6*2800*12000, 7*2200*8000, 7*2920*8200, 7*2920*8780, 2200*11200, 8*2200*5730, 8*2210*11000, 8*2400*12000, 9*2300*6870, 12.5*2900*11000, 12.9*2987*10384, 13.6

Update time:

Apr 14 2021

Summary:

Application of medium and thick plates: Medium and thick plates are used for construction engineering, machinery manufacturing, shipbuilding, bridge construction, etc. Medium and thick plates 15mo3 material specification can also be used to manufacture va

Update time:

Apr 14 2021

Summary:

ASTM A387 steel 15mo3 vs 16mo3 specification refers to 6 grades levels of alloy steel plate for elevated temperature applications, classified by chromium and molybdenum content, Grade 11 and Grade 12 has similar chemical content,they can be used in welded

Update time:

Apr 14 2021

Summary:

High-strength steel plates have the following characteristics. First, the strength is high, the bearing capacity is very good, and it is not easy to break. Second, compared with other steel plates under the same strength requirements, high-strength steel

Update time:

Apr 14 2021